Tube Socket Source
Moderators: zaphod_phil, CurtissRobin, colossal
- blade-rh4
- Unrated
- Posts: 1
- Joined: Tue 02/22/05 2:00 am
Tube Socket Source
Hi,
I am in the process of converting a Vox AC-15 reissue to use a tagboard instead of a PCB, (hopefully!) with chassis mounted sockets. Does anyone here (maybe people who have converted similar Marshalls given these Voxes were made by Marshall) know of a source (preferably UK or EU, but otherwise anywhere) of 9-pin tube sockets to fit a 1" chassis hole? Or would I be better off just starting with a completely blank chassis made to the same dimensions?
Thanks,
James
I am in the process of converting a Vox AC-15 reissue to use a tagboard instead of a PCB, (hopefully!) with chassis mounted sockets. Does anyone here (maybe people who have converted similar Marshalls given these Voxes were made by Marshall) know of a source (preferably UK or EU, but otherwise anywhere) of 9-pin tube sockets to fit a 1" chassis hole? Or would I be better off just starting with a completely blank chassis made to the same dimensions?
Thanks,
James
0 x
- lastwinj
- Frequent poster
- Posts: 903
- Joined: Sat 01/22/05 2:00 am
- Location: Livonia, MI